1、飼料攪拌機http://www.trilink-logistics.com/用計算或排水的方法檢測總容積，用衡器稱出投料量的質量，記錄每次生產過程的周期時間，攪拌均勻的工藝條件下，計算單位時間內攪拌出的物料質量即為產量，檢測三次取其平均值。
Feed mixer detection method to calculate the total volume or drainage, with scales weigh the quality of feeding amount, the recording process of each production cycle time, stirring uniform process conditions within the unit of time
mixing and material quality is the yield, detection of three averaged.
2、飼料攪拌機用秒表記錄物料在混合室內攪拌的時間，分別記錄混合飼料攪拌機的熱機，檢測產量過程中冷機測溫裝置表的讀數，與用溫度計直接插入排出攪拌物料中測得的溫度之差。
Feed mixer with a stopwatch recorded material in the mixing chamber stirring time, were recorded mixed feed mixer heat engine, check the output readings during cooler temperature measuring device table, and with a thermometer inserted directly discharged material difference stir in the measured temperature.
3、飼料攪拌機http://www.trilink-logistics.com/用轉速表測主軸的轉速，測物料攪拌時的最大噪聲，用聲級計在離機排料位置正前方lm，高1.5m處。
Feed mixer with a tachometer measuring spindle speed, maximum noise measured during mixing of materials, with the sound level meter away from the machine in front of the discharge location lm, at 1.5m high.