飼料攪拌機http://www.trilink-logistics.com/的攪拌裝置主要由攪拌筒、攪拌筒驅動裝置、裝料和卸料裝置、攪拌筒支承裝置及供水系統等組成，工作時發動機通過取力傳動軸、液壓傳動系統及齒輪減速器驅動攪拌筒轉動。攪拌筒正轉時進行攪拌或裝料，反轉時卸料。攪拌筒的轉速和轉動方向由操作人員根據車的工作狀態，通過改變液壓馬達的斜盤角度來實現。
Feed mixer mixing device consists of mixing tube, mixing tube drives, loading and unloading equipment, mixing tube support means and water supply system, etc., when the operation of the engine through the PTO shaft, hydraulic transmission and gear reducer drive agitation drum rotation. Stirring or mixing tube is being transferred when loading, unloading time reversal. Speed and direction of rotation of the mixing tube by the operator depending on the vehicle
operating state, by changing the swash plate angle of the hydraulic motor to achieve.
大部分飼料攪拌機http://www.trilink-logistics.com/攪拌筒都采用梨形結構，是一個變截麗面不對稱的雙錐體，外形似梨，從中部直徑最大處向兩端對接著一對不等長的截頭圓錐，底段錐體較短，端面封閉；上端錐體較長，端部開口，低端面上安裝著中心轉軸，上段錐體的外部有一條環形滾道。整個攪拌筒通過中心轉軸和環形滾道傾斜臥置，固定于機架上的調心軸承和一對支承滾輪組成三點支承結構，所以能平穩地饒其軸線轉動。攪拌筒的驅動力來自于液壓馬達對中心轉軸的驅動。
Most feed mixer mixing tube are used pear-shaped structure, is a variable cut Korea face asymmetric double cone, like a pear shape, from the middle to the ends of the maximum diameter of the right and then one pair of unequal length truncated cone bottom cone segment shorter closed end; the upper cone is longer, open-ended, low surface to install a central shaft, on the outside there is a segment of the cone ring raceway. Entire mixing tube through the center of the shaft and the ring raceways inclined lying position, fixed-aligning roller bearings and a pair of support on the frame support structure consisting of three, they are able to smoothly Rao its axis. The driving force comes from the mixing tube hydraulic motor drive shaft to the center.